6�25�4�- HYSTERESIS VALUE
The hysteresis value, i.e., difference between the alarm connection and disconnection value, in %, is
programmed on this screen.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
Configuration values
Table 47:Configuration values: Hysteresis value�
Hysteresis value
Minimum value
0 %
Maximum value
99 %
Press key
to access the next programming step.
6�25�5�- LATCH
The latch is selected on this screen, i.e., if the alarm is interlocked after it has been tripped, even when
the condition that triggered it has disappeared.
Press key
for 3 seconds to edit the value. The
icon appears at the top of the screen.
The key
jumps between the possible options.
To validate the data, press
for 3 seconds and the
icon will disappear from the display.
60
CVM-C11
Instruction Manual
Содержание CVM-C11
