Circutor Compact DC 2, Инструкция по эксплуатации

Страница: 52 / 78

52
COMPACT DC
Instruction Manual

EthTx
: Average value of the number of bytes per second sent over the Ethernet network in the
last 5 minutes.

Plc: Indicates the usage percentage of the PLC communications for receiving/sending data.

SerRx: Average value of the number of bytes per second received over the serial port in the last
5 minutes.

SerTx: Average value of the number of bytes per second sent over the serial port in the last 5
minutes.

Temp:
Internal temperature value of the
COMPACT DC
.
Communication statistics:
Used to graphically display the number of energy meters connected every hour during the last 24
hours.
5�13�- CONCENTRATOR MENU: INPUTS (
COMPACT DC 4I, DC-S 4I and DC 2
models)
This screen,
Figure 59
, is only available in the COMPACT DC 4I, DC-S 4I and DC 2 models, which has the
digital inputs module.
Figure 59: Inputs�

Inputs:
This section shows the status of the 4 inputs and the option to configure the function to send a
spontaneous event each time an input is connected.
Spontaneous events are sent via SOAP messages.
The logic state of an input can also be changed to check its functionality.
5�14�- CONCENTRATOR MENU: PARAMETERS
From this screen you can display and configure all of the device's parameters.
5�14�1� GENERAL PARAMETERS
The general parameters of the COMPACT DC are factory-set and cannot be modified from the web site,
as shown in
Figure 60
.