Circutor Compact DC 2, Инструкция по эксплуатации

Страница: 46 / 78

46
COMPACT DC
Instruction Manual
Cycle parameters:

PrefixCycles: Prefix of the file name.

IpFtpCycles: IP address of the server for downloading the test cycle.

DestDirCycles: Path of the server for downloading the test cycle.

UserFtpCycles:
Username of the server for downloading the test cycle.

PwdFtpCycles:
Password of the server for downloading the test cycle.
Upload cycles file:
In this section you can select the cycle configuration file in XML format.
An example of this type of file is shown below.
Figure 50: Short cycle example file�
5�7�- METERS MENU: TOPOLOGY LOG
With the topology log and the test cycles enabled, you can get an overview of the functioning of the
PRIME network.
The topology log is used to determine the availability of the different energy meters over a time period.
Unlike the test cycles , the topology log just checks whether a device is connected without carrying out
different communications with the energy meter. Therefore it is less intrusive and can be performed in
parallel with the normal operations of the concentrator.
From this screen,
Figure 51,
you can view and configure the parameters necessary to log the network
topology.
Figure 51:Topology log�