40
CIRWATT B 400
Instruction Manual
L64 screen (MANUF. INFO: STATUS)
This screen shows the most critical alarms on the meter.
L65 screen (MANUF. INFO: CRC)
This screen shows the meter's CRC code.
4�2�3 - SPECIAL FUNCTIONS
The sealable button and/or the wire cover sensor will be used to access the Special Functions.
The
sealable button
will be used to navigate through the different information screens. To navigate
within the same level, use short presses (PPC). To move to the next highest level, use a long press (PPL).
There is an option
BACK
at the end of the two menus that can be used to return to the standby screen
with a long press of the sealable button.
To confirm a selection, long press the sealable button. The device will return to standby mode 60 sec-
onds after the last button press.
REPOSO
Cierre
PPL
PC
Sensor cubrehilos
activado
Sensor cubrehilos
desactivado
rog
PC
PC
Reset
Cierre
PC
rog
PC
Atras
PC
Atras
PC
Figure 4:Special functions�
4�2�3�1 -Closing Menu
When a contract is closed, the next screen will be displayed for 3 seconds:
CiErr
HECHO
If manual closing is inactive on the device due to communications, the following message will be dis-
played per screen for 3 seconds:
Wire cover sensor
activated
Wire cover sensor
disabled
