Circutor CEM-C30, Инструкция по эксплуатации

Страница: 13 / 40

4�- OPERATION
The CEM-C30 is an energy meter capable of measuring:

Imported and exported active energy and reactive energy in the four quadrants.
(according to version).

Active, reactive and apparent power (according to version).

RMS voltage and current

Power factor, PF
4.1.- BUTTON FUNCTIONS
The CEM-C30 has 2 buttons that allow you to browse the different screens and program the
unit.
The button can be sealed to prevent access to the programming of the most relevant pa-
rameters.
To seal the button, insert the seal through the slot found under the
button,
Figure 6
.
ESCALA 2:1
ESCALA 2:1
Figure 6: Sealing the button�
Button functions on the measuring screens (
Table 4
):
Table 4: Button functions on measuring screens�
Button Short press Long press (> 2 s)
For the cyclic movement.
Next screen.
Enters reading mode.
Enter the programming menu -
13
Instruction Manual
CEM-C30