Circuit-test PSC-4 Series, Руководство пользователя

Страница: 13 / 16

13
- Select running cycle between 0-999. You can use slide bar to select or
directly input value in text box. Input 0 means run the program forever.
- Click button to start running cycle.
- In between program running cycle, click button to stop program.
- Click to clear the setting.
2.7 Set Upper limited of Voltage and Current
Select Setting tab to configure Voltage Upper Limit (UVL) and Current Upper Limit
(UCL). If you set the UVL and UCL, all setting in General Output setting, Internal
Timed Program and External Timed Program cannot higher than this limit. You
will find the setting become red to alert you it is over the UVL or UCL.
In the setting tab,
- Direct input your setting value or using slide bar to configure for the
UVL an UCL.
- Click button to save the setting to power supply.