OG_MU4-USBIF_v10e 15 Circuit Design, Inc.
OPERATION GUIDE
The additions and changes are shown below underlined.
Example: Vendor ID = 1234, and product ID = 5678
◆
Ftdibus.inf
[FtdiHw]
%USB¥VID_0403&PID_6001.DeviceDesc%=FtdiBus.NT,USB¥VID_0403&PID_6001
%USB¥VID_0403&PID_6010&MI_00.DeviceDesc%=FtdiBus.NT,USB¥VID_0403&PID_6010&MI_00
%USB¥VID_0403&PID_6010&MI_01.DeviceDesc%=FtdiBus.NT,USB¥VID_0403&PID_6010&MI_01
Add %USB¥VID_1234&PID_5678.DeviceDesc%=FtdiBus,USB¥VID_1234&PID_5678
[FtdiHw.NTamd64]
%USB¥VID_0403&PID_6001.DeviceDesc%=FtdiBus.NTamd64,USB¥VID_0403&PID_6001
%USB¥VID_0403&PID_6010&MI_00.DeviceDesc%=FtdiBus.NTamd64,USB¥VID_0403&PID_6010&MI_00
%USB¥VID_0403&PID_6010&MI_01.DeviceDesc%=FtdiBus.NTamd64,USB¥VID_0403&PID_6010&MI_01
Add %USB¥VID_1234&PID_5678.DeviceDesc%=FtdiBus.NTamd64,USB¥VID_1234&PID_5678
[Strings]
Ftdi="FTDI"
DESC="CDM Driver Package"
DriversDisk="FTDI USB Drivers Disk"
USB¥VID_0403&PID_6001.DeviceDesc="USB Serial Converter"
USB¥VID_0403&PID_6010&MI_00.DeviceDesc="USB Serial Converter A"
USB¥VID_0403&PID_6010&MI_01.DeviceDesc="USB Serial Converter B"
Add USB¥VID_1234&PID_5678.DeviceDesc="My New USB Device"
◆
Ftdiport.inf
[FtdiHw]
%VID_0403&PID_6001.DeviceDesc%=FtdiPort232.NT,FTDIBUS¥COMPORT&VID_0403&PID_6001
%VID_0403&PID_6010.DeviceDesc%=FtdiPort2232.NT,FTDIBUS¥COMPORT&VID_0403&PID_6010
Add %VID_1234&PID_5678.DeviceDesc%=FtdiPort232,FTDIBUS¥COMPORT&VID_1234&PID_5678
[FtdiHw.NTamd64]
%VID_0403&PID_6001.DeviceDesc%=FtdiPort232.NTamd64,FTDIBUS¥COMPORT&VID_0403&PID_6001
%VID_0403&PID_6010.DeviceDesc%=FtdiPort2232.NTamd64,FTDIBUS¥COMPORT&VID_0403&PID_6010
Add %VID_1234&PID_5678.DeviceDesc%=FtdiPort232.NTamd64,FTDIBUS¥COMPORT&VID_1234&PID_5678
[Strings]
FTDI="FTDI"
DESC="CDM Driver Package"
DriversDisk="FTDI USB Drivers Disk"
PortsClassName = "Ports (COM & LPT)"
VID_0403&PID_6001.DeviceDesc="USB Serial Port"
VID_0403&PID_6010.DeviceDesc="USB Serial Port"
Add VID_1234&PID_5678.DeviceDesc="My New USB Device"
For details, refer to the information concerning changes to the FTDI driver related files.
Note: The USB driver for the MU4-USB has the Circuit Design vendor ID, and you are not authorized to use it.
The USB/UART conversion chip uses the FTDI FT8U232BM, and by downloading the direct driver from the FTDI
website, you can control the USB interface directly without using the COM port.
However, we do not provide support for direct control. This should be carried out on the responsibility of the
developer.
6.3 Directly Controlling the USB Chip
