Circontrol Wallbox eHome Series, Руководство по установке

Страница: 23 / 36

21
Remote control function
I
Remote control function is a potential free contact which allows the remote start and stop of a
charge transaction.
This remote control function is disabled by default, by means of a jumper (as shown in the picture
below). The jumper shall be removed to enable this function.
When the jumper is removed, a device outside of the
Charge Point can be placed to control the charge
transaction. This device should close the contact
"START" to allow the charge transaction. If the contact
is open, the charge transaction wont be able to start.
Do not remove the jumper if remote control function is not required, otherwise
the charge transaction process cannot start while the contact is open.