Circle Communication Products, Inc
2.4G Cordless Telephone System - Desktop Extension (WDE ER) user guide
Page 20
Call Hold
0 )
0 1 - 0 1
1 2 : 0 0 A M
Caller ID no.
T A L K - 0 2 : 2 8
V 1
H O L D
R E C
T X V M
Description:
You can use Call Hold to put a call on hold temporary. The
held party will hear music during the holding period.
Activation:
1. During conversation, press soft key HOLD .
2. You will hear a dial tone.
3. a. To call a
third party, dial the number you want to call or
b. to answer another incoming line that is ringing at
another extension, press the soft key PICK.
4. Switch between two parties by pressing the soft key
HOLD .
5. If you want to drop the party on line and return to the
party on hold, you can hang up. Your telephone rings,
you lift up handset to resume conversation with the party
that was on hold.
Result:
The held line Button is flash
Condition:
If a call on hold is not retrieved in a specified period, the
system will automatically recall the extension.
Call Hold, Exclusive
0 )
0 1 - 0 1
1 2 : 0 0 A M
Caller ID no.
T A L K -
0 2 : 2 8
V 1
C O N F
Description:
You can use the soft key CONF to put a call on exclusive
hold condition. The held party will hear music during holding
period. The call can only be picked up again at the same
extension. When time out occurs, the exclusive hold
condition will change to a common hold condition and can be
picked up at any extension.
Activation:
During conversation, press soft key CONF .
Result:
The held line Button is flash in green.
Condition:
If a call on hold is not retrieved in a specified period, the
system will automatically recall the extension user.
Call Paging
0 )
0 1 - 0 1 1 2 : 0 0 A M
M i s s C a l l
0
User Name
P A G E
Description:
Paging allows you to make a voice announcement through a
PA system via the Audio Out port of the main control base.
Activation:
1. Press the soft key “PAGE” in idle mode.
2. ‘PAGING’ will appear on the LCD
3. Make a voice announcement.
Result:
The LCD will show ‘Paging’ acknowledgement.
Condition
It is optional. To connection the Audio Out Port to a PA
system use an audio cable with a 3.5mm plug.
