CIRCLE FITNESS M-7 SERIES E TYPE, Руководство по обслуживанию

Страница: 23 / 25

Document: Service Manual
Description: Treadmill Model: M7 E / M7L E
Page: 23 of 25
23
4. Other Information
4.1. Real Speed Do Not To Fit In With Display Speed
Step illustrate Auxiliary Photo
1 To START and operate the speed to the
position where has problem.
2 To measure the running belt speed to
compare to display speed.
Is there really different?
The accuracy is normal if speed tolerance
between ±10% display speed.
3 To execute the engineer mode ONE for
speed calibration and check speed
parameter is normal, if speed parameter
abnormal, please replace the speed sensor. Refer to:
2.3
『
Speed Sensor
』
3.1
『
Engineering Mode ONE: Factory
Settings
』
4.2. No Any Display On Console(No Power)
Step illustrate Auxiliary Photo
1 To check the fuse where near the AC source
power switch is start or not, if the fuse
started please to press draw back for reset
the power. If every is fine after reset power, it
to mean the load is to big, need to do the
maintenance or replace the running belt and
deck.
2 If fuse do not start, please open the motor
cover and check the power supply normally
from interface PCB. Refer to:
2.1
『
Interface PCB
』
3 If interface PCB is ok after check, please
check the console wire connection. Refer to:
2.2
『
Console Wire
』
4 If console wire check is ok, to check the
voltage where from the interface PCB by
multi-meter, if got voltage, please replace the
console PCB.
Gray+ Purple-