Circe Cycles Morpheus, Инструкция по сборке

Страница: 6 / 8

6
Circe Cycles
Once the crank assmbly is positioned on the main
tube it can be fixed in place using the four M6 hex
bolts and a 10mm spanner.
INSTALLING THE PEDALS
(Your own if not ordered from us) – The pedal
threads are handed. The right hand pedal tightens
in the normal direction; the left-hand pedal has
a left-hand thread, and tightens in the opposite
direction to normal. Tighten the pedals to the
torque shown in Appendix A.
BELL AND REFLECTORS
Reflectors and a bell are supplied with your
tandem. The bell can be mounted anywhere on
the handlebars where it can be reached easily.
The front reflector can also be mounted to the tab
on the end of the boom. The rear reflector fits to
the Captain’s seatpost, ensure that the reflector is
visible at the height you intend to have the post at.
If not, you may need to reposition the reflector so
that it is visible.
PRE-RIDE
Check all nuts, bolts and quick releases to make
sure everything is tight (See appendix A for torque
settings). Ensure the wheels spin freely and the
brakes function correctly.
FIRST RIDE
Check the gears shift correctly, refer to the Owner’s
manual, or manufacturers manual, for adjustment.
Pay attention to the fit and make any adjustments
required, once you are stationary. Finally, ensure
there are no rattles or unexpected sounds.
You can now refer to the User’s manual for final set
up and on-going maintenance.