Cirago UDA2000, Руководство пользователя, Страница: 8 / 22

PAGE
·
11
PAGE
·
12
Note: The screen may flash or go black during the install.
No message will be shown at the end of the install.
4. Connect your USB Graphic Adapter via the USB cable to your PC.
Installing device driver message
The Windows User Account Control window opens.
5. Click Yes .
DisplayLink automatically installs the device.
The DisplayLink software end user licence agreement window
opens (see above).
6. Click I Accept.
The DisplayLink graphics software installs, without notification
that it has completed.
Note: On some machines you may need to reboot before you can use your DisplayLink enabled device.
This section describes how to use DisplayLink's Software. The section is divided into sub-sections relating to your operating
system.
On Windows 7, you can configure a UGA device through the use of Windows Display Properties (WDP). WDP provides a
simple method to attach, rotate, duplicate or extend screens as well as modify screen resolution.
To open WDP
There are several ways to open WDP.
1. Right-click on the desktop.
2. Select Screen Resolution from the menu.
3. WDP opens.
OR
1. From Start menu > Devices and Printers.
2. Double-click the DisplayLink Device icon.
3. WDP opens.
OR
1. Right click on the DisplayLink icon
2. Click Advanced.
3. WDP opens.
Setting the Display
Follow this procedure to set the display.
Using the USB Graphics Software
4. Using the USB Graphics Software
Windows 7 - Controlling the Display