background image

Hair Entanglement

When the hair tangles or knots in the drain cover, trapping the swimmer

underwater. This hazard is present when the flow rating of the cover is too small for the pump
or pumps.

Limb Entrapment

When a limb is sucked or inserted into an opening resulting in a

mechanical bind or swelling. This hazard is present when a drain cover is missing, broken,
loose, cracked or not properly secured.

Body Entrapment

When a portion of the body is held against the drain cover trapping the

swimmer underwater. This hazard is present when the drain cover is missing, broken or the
cover flow rating is not high enough for the pump or pumps.

Evisceration/Disembowelment

When a person sits on an open pool (particularly a child

wading pool) or spa outlet and suction is applied directly to the intestines, causing severe
intestinal damage. This hazard is present when the drain cover is missing, loose, cracked, or
not properly secured.

Mechanical Entrapment

When jewelry, swimsuit, hair decorations, finger, toe or knuckle is

caught in an opening of an outlet or drain cover. This hazard is present when the drain cover is
missing, broken, loose, cracked, or not properly secured.

GENERAL SAFETY RULES

1. The products mentioned in this manual are specially designed for the pre-filtering and
re-circulation of water in swimming pools and spas.
2. They are designed to work with clean water at a temperature not exceeding 104

 

!

40

!

"

3. The installation should be carried out in accordance to the safety instructions of swimming
pools, especially Standard HD 384.7.702 , and the specific instructions for each facility.
4. The compulsory rules on accident prevention should be carefully followed.
5. Any modification of the pump requires the prior consent of the manufacturer. Original
replacement parts and accessories authorized by the manufacturer ensure a high level of
safety. The manufacturer of the pump assumes no liability for the damage and injuries caused
by un-authorized replacement parts and accessories.
6. During operation, some parts of the pump are subject to dangerous electric voltage. Work
may only be performed on each pump or on the equipment connected to it after disconnecting
them from the main power and after disconnecting the starting device.
7. The user should make sure that assembly and maintenance tasks are carried out by
qualified authorized persons and that these persons have first carefully read the instructions
for service and installation.
8. The operating safety of the pump is only guaranteed if the installation and service

2

WARNINGS AND IMPORTANT SAFETY PRECAUTIONS

SUCTION ENTRAPMENT HAZARD

Содержание CSPPS702












Отзывы: