Operations
MediaVault 4105 User Manual
5-12
MV 4105_Ciprico Inc.
Mode Change Procedure
To change the mode, perform the following.
1.
Turn off the computer.
2.
Select a mode.
3.
Set the mode number at the Mode Select buttons, located at the rear of
the MV 4105. See Figure 5-3. Use a pointed object (such as a pen tip)
to press the desired Mode Select button.
• Press the upper button to decrease the mode number.
• Press the lower button to increase the mode number.
FIGURE 5-3.
Mode Select Buttons.
4.
Turn off power to the MV 4105.
5.
Press and hold the
M
ODE
S
ET
button (see a description of the button on
page
5-13
)
6.
Apply power to the MV 4105.
7.
Keep holding down the button until two beeps are heard to confirm the
mode change.
8.
Release the
M
ODE
S
ET
button.
Press
to change
to change
Press
