CipherLab RS51 Скачать руководство пользователя

Страница: 3 / 209

- 3 -

Important Notices

IMPORTANT NOTICES

FOR USA

Tested to Comply with FCC Standards

FOR HOME OR OFFICE USE

FCC ID: Q3N-RS51

This equipment has been tested and found to comply with the limits for a

Class B

digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communication. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Find the certificate information from:

Setup

→

About Phone

→

Regulatory information

Содержание RS51


















































































































































































































Результаты поиска

Содержание RS51

Отзывы:

Похожие инструкции для RS51

Бренды по названию

Популярные бренды

CipherLab RS51, Справочное руководство

Результаты поиска

Содержание RS51

Отзывы:

Похожие инструкции для RS51

Бренды по названию

Популярные бренды