CipherLab CP30 Series, Справочное руководство

Страница: 177 / 187

165
Appendix III 2D Imager (SE4500)
Trioptic Code 39 Decide whether to decode Trioptic Code 39.
 Trioptic Code 39 is a variant of Code 39 used in the
marking of computer tape cartridges. It always
contains six characters.
No
Select Length
(min/max)

One or two fixed lengths
 Range (1~55)
4~55
Intercharacter Gap
Size
The Code 39 and Codabar symbologies have an
intercharacter gap that is typically quite small. Due to
various barcode printing technologies, this gap can grow
larger than the maximum size allowed, preventing the
scan engine from decoding a barcode. If this problem
occurs, set it to “Large Intercharacter Gaps” to tolerate
these out-of-specification barcodes.
 Normal intercharacter gaps
 Large intercharacter gaps
Normal
Code 93 Enable
Select Length
(min/max)
 One or two fixed lengths
 Range (1~55)
4~55
MSI Enable
Check digit verification If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the check digit is incorrect, the
barcode will not be accepted.
Check digit algorithm:
One Check Digit Single Modulo 10
Two Check Digits
 Mod 10/Mod 11
 Mod 10/Mod 10
Single Modulo
10
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
No
Select Length
(min/max)
 One or two fixed lengths
 Range (1~55)
4~55
GS1 DataBar (RSS) ---
GS1 Databar-14 GS1 DataBar-14 is short for GS1 DataBar Omnidirectional.
This group consists of (1) GS1 DataBar Omnidirectional,
(2) GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and
(4) GS1 DataBar Stacked Omnidirectional.
Enable
GS1 Databar Limited Enable
GS1 Databar Expanded This group consists of (1) GS1 DataBar Expanded, and (2)
GS1 DataBar Expanded Stacked.
Enable