Cineversum Black Wing R599760, Руководство пользователя

Страница: 15 / 24

3.0 INSTALLATION GUIDELINES
R599760 - BlackWing Three User Manual 15
Command Format
When sending a command to this unit, use the following data format:
*[ ] is not necessary
Response data format
Upon receiving a valid control command, the unit sends back a response data to the computer to confirm the
command: see tthe examples below.
Available Commands and Parameters
a) Commands
[ ]
Header Proj. ID Command Com. Parameters LF
1 byte 2 bytes 2 bytes Variable length: 0, 1 or 4 bytes 1 byte
Header : Designates the Command type. 2 possible headers:
! (21h): Assigns command to the projector (Command)
? (3Fh): Query data from the projector (Asking command)
Proj. ID : Designates the Projector Identification. Fixed to 89h 01h.
Command : Designates command.
Com. Parameters : Designates the command parameters. Variable length from 0 to 4 bytes
LF : Designates the end of the data. Fixed to Line Feed (0Ah)
Command
Header (21h)
ASCII code Parameters Description
Connection Check 00h 00h none Checks whether communication between the
projector and the computer is working
Power ON/OFF 50h 57h 31h If the projector is in standby mode, this command
switch this unit ON.
30h If the projector is powered ON, this command
switch this unit into Standby Mode.
Switch Input 49h 50h 30h Switch active input to S-Video
31h Switch active input to Video
32h Switch active input to Comp.
36h Switch active input to HDMI 1
37h Switch active input to HDMI 2
Switch gamma table 47h 54h 30h Switch Gamma to NORMAL
31h Switch Gamma to THEATER1
32h Switch Gamma to THEATER2
33h Switch Gamma to DYNAMIC
34h Switch Gamma to CUSTOM
Gamma coef. 47h 50h 30h Set gamma coefficient to 1.8
31h 1.9
32h 2.0
33h 2.1
34h 2.2
35h 2.3
36h 2.4
37h 2.5
38h 2.6