Cineversum Black Wing MK 2015 R599850, Руководство пользователя

Страница: 8 / 44

R599850 - BW MK2015 User Manual
INSTALLATION GUIDELINES
8
2.3 Environment of Use
This unit makes use of a light source lamp that reaches a high temperature during projection. Do not allow
projection under the following conditions:
• Projection with the unit laid on sides.
• Projection at a location that blocks the air inlets or exhaust vents.
• Projection at a place exposed to air blasts from an air conditioner.
Allowed Inclination during operation
Due to the lamp position and operating angle, this unit cannot operate with more than 5° angle horizontally and
15° angle vertically. This unit cannot be operated on the side
5°
15°
2.4 Air-Flow and Space Requirements
This unit can be installed in table, ceiling, rear table or rear ceiling position. Make sure that the unit is installed
within the space requirements described below (A: air inlets, B: air outlets). This unit needs at least 20cm of non-
obstructed space on each side to allow a sufficient air flow.
B B
A
B
A
A
A
Air flow.
2.5 Ceiling Mounting the Unit
When mounting of this unit is required, make use of the 4 screw holes (M5x20 screws) at the bottom of this unit
indicated by the letter A. Allow sufficient space around the air inlets to avoid blocking them.
Precautions for Ceiling-mount
• To ceiling-mount this unit, special expertise and techniques are
necessary. Be sure to ask your dealer or specialist to perform
mounting.
• Do not mount at places that may be subjected to vibration and
shock.
• Depth of the screw holes (A) is 23 mm. Use at least 13mm long
screws but not longer than 23mm as you may damage inside the
projector.
• Install at a safe place in case this unit or a part of it may drop. If the
light-source lamp is broken, small pieces of glass from the mesh of
the filter may appear outside the unit.
• Regardless whether the unit is still under guarantee, Cineversum
d
D
A
A
A
A