cinetto Wave Sensor, Быстрое руководство пользователя

Страница: 11 / 12

2. Reset
To reset a channel, press and hold the corresponding button for 10 seconds. The LED will start to flash and then remain
steady for two seconds. Once it stops flashing, the reset procedure is completed and it will be possible to pair again
to the channel up to a maximum of 10 sensors.
11
Touch the sensor you want to pair, this will be immediately recognised, causing the LED to flash quickly twice before
turning off. At this point the procedure is completed and the devices are correctly paired.
• Up to 10 different sensors can be paired with each channel.
• The receiver remains in the “pairing” phase for 30 seconds. If no sensor is touched during this time, the
procedure is blocked.
• If you try to pair a sensor already paired to the channel, the LED will flash quickly twice and then block
the procedure.
• If nothing happens, this means that either there is a system malfunction or the maximum number of sensors
that can be paired with the channel has been reached. Try resetting the channel (see point 2) and repeat
the pairing.