Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
En
glis
h
Cineroid L10C-VCe
VARIABLE & PORTABLE LED LIGHT
Parts
Installing the Battery
06
07
Magnet
Dimmer
Display
Color change /
Channel Setting Buttons
Power ON/OFF
DC in
LED
IR Sensor
IR Sensor
Power cable
Screw
1/4" Screw mount
Powering On/Off
1. Attach the battery mount to the back of the body with the use of the two screws on the mount.
2. Connect the cable on the battery mount to the body.
3. Attach the battery to the battery mount.
4. Be sure to charge fully the battery before installing.
5. Sony NPF Type battery is compatible.
1
3
1
2
3
1. Push the power switch “ON” to turn on the LED light.
2. Check if the information is displayed properly.
3. Push the power switch "OFF” to turn off the LED light.
