5. Charging the Battery
The controller can be used as USB or D
tap output. Connect the power to the
controller and use it with the switch
turned on.
6. USB and D-Tap Output
Press DMX on/off button 1 second in order to set channel.
DMX LCD will be shown blinking.
Change the channel 000~511 by setting the buttons.
Press Preset 1 or 3 button to charge channel.
Press preset 2 button for 1 second, channel setting is
completed.
7. DMX Channel Setting
You can use the controller to charge the battery(FLV or FLG).
Controller connected to the AC is turned off and the Battery
Charging Switch is operated, charging of the battery starts.
During the charging, the LCD shows status of charging.
1
2
3
3
4
1
