Cine Gears Ghost Eye 150M, Руководство пользователя

Страница: 27 / 33

Getting Started
1) Ensure the video source output of the camera is OK, and the HD monitor is powered on
and switched to connected video input port.
2) Ensure all 7 RX and all 2 TX antennas are installed, preferably with an orthogonal angle to
each other for best RF performance, as in figure below.
3) Ensure all input, output SDI or HDMI cables are connected.
4) Ensure both the transmitter and receiver are powered via battery or DC input. Then turn
power switch of the transmitter and receiver, respectively, to ‘ON’.
400M Installation
© 2017 Cine Gears INC. All Rights Reserved. 24
400M Installation

Getting started
© 2016 Cine Gears INC. All Rights Reserved
1) Ensure the video source output of the camera is OK, and the HD
monitor is powered on and switched to connected video input port.
2) Ensure all 7 RX and all 2 TX antennas are installed, preferably with an
orthogonal angle to each other for best RF performance, as in figure
below.
3) Ensure all input, output SDI or HDMI cables are connected.
4) Ensure both the transmitter and receiver are powered via battery or DC
input. Then turn power switch of the transmitter and receiver, respectively,
to ‘ON’.
Transmitter

Getting started
1) Ensure the video source output of the camera is OK, and the HD
monitor is powered on and switched to connected video input port.
2) Ensure all 7 RX and all 2 TX antennas are installed, preferably with an
orthogonal angle to each other for best RF performance, as in figure
below.
3) Ensure all input, output SDI or HDMI cables are connected.
4) Ensure both the transmitter and receiver are powered via battery or DC
input. Then turn power switch of the transmitter and receiver, respectively,
to ‘ON’.
Transmitter