ASSEMBLY INSTRUCTIONS.
Hold the barbecue on its side and release the folded legs from their
retaining clips at either end of the barbecue. Swing the legs out completely,
and rotate the inner struts so they can be pushed firmly into the same
retaining clips. Stand the barbecue upright on a firm and level surface.
When required, use an empty ring-pull drinks can as a fat drain container.
A stainless-steel clip emerges from each drain hole, which can be found
within the area of the chromed hoop at either end of the barbecue.
Thread the clip through the hole in the can.
CAUTION:
Use an oven glove when removing the can, which may be
very hot. Dispose of any hot fat with due caution.
POSITIONING THE BARBECUE.
The barbecue is designed to be freestanding. Ensure that the barbecue is
placed on a flat surface with minimum clearances specified in the figure be-
low between any side, rear or overhead obstructions. When selecting the
location ensure the barbecue is not placed near or under combustible
materials or in an excessively windy environment.
Page 4, Issue 1
600mm
600mm
600mm
1000mm