Cincoze DI-1000 Series Скачать руководство пользователя страница 83

Страница: 83 / 92

DI-1000 Series

Rugged Embedded Computer

| User’s Manual

5.7 Save & Exit

5.7.1 Save Changes and Exit

This item allows you to exit system setup after saving changes.

5.7.2 Discard Changes and Exit

This item allows you to exit system setup without saving changes.

5.7.3 Save Changes and Reset

This item allows you to reset the system after saving changes.

5.7.4 Discard Changes and Reset

This item allows you to reset system setup without saving any changes.

5.7.5 Save Changes

This item allows you to save changes done so far to any of the setup options.

5.7.6 Discard Changes.

This item allows you to discard changes done so far to any of the setup options.

5.7.7 Restore Defaults

This item allows you to restore/ load default values for all the setup options.

5.7.8 Save as User Defaults

This item allows you to save the changes done so far as user defaults.

5.7.9 Restore User Defaults

This item allows you to restore the user defaults to all the setup options.

Содержание DI-1000 Series





























































































Результаты поиска

Содержание DI-1000 Series

Отзывы:

Похожие инструкции для DI-1000 Series

Бренды по названию

Популярные бренды

Cincoze DI-1000 Series, Руководство пользователя

Результаты поиска

Содержание DI-1000 Series

Отзывы:

Похожие инструкции для DI-1000 Series

Бренды по названию

Популярные бренды