2
(513) 367-7100 | [email protected] | www.e-ci.com
Introduction
SAAM is a Fused Filament Fabrication (FFF) 3D printer. Plastic filament is
extruded via a mechanical drive through a hot nozzle as the print head is moved
in X, Y, and Z axes to form a part. SAAM is controlled with NVCloud, accessed
at my.NVBOTS.com. NVCloud converts manifold .STL files into toolpaths that
are pushed to SAAM. After a print job is successfully printed, the part removal
mechanism will remove the print job to the part collection bin readying SAAM to
begin the next print job.
SAAM 3D
printer is Built to Share™. It offers the only automated part removal
in the industry, and is paired with NVCloud software that allows users to print
parts anytime, from any cloud-connected device
– while providing
administrators with full control of print queues and workflows typical in a shared-
use scenario. This combination of capabilities makes SAAM uniquely suited for
continuous 24-7 operation in multi-user environments.
To start printing on your SAAM, visit