7
5 Storage
After use always wipe down the machine, and remove
and clean the drivebacks discs and pads. Clean the
rotating dust cover (A) and check the condition of the
brush seals (B). The seals should be cleaned
periodically to maintain their effectiveness (Fig.2).
The machine should normally be stored with the
handle in the fully upright position, with the brush
head tipped back.
Never leave the brush head
resting on the drive pins.
Wrap supply cord around the cable storage hooks
ensuring that the plug is not trailing on the floor.
Store the machine in a dry indoor area only.
6 Maintenance
WARNING - Before undertaking maintenance
operations or adjustments switch off machine
and unplug from the electricity supply.
The machine requires minimum maintenance apart
from the following checks by a trained operator.
•
Supply cord
- Regularly inspect sheath, plug and
cord anchorage for damage or loose connection.
Only replace the supply cord with the type specified
in these instructions.
•
Solution tank
- Check water flow, if restricted
inspect hose for blockage or kinks. Dismantle
control valve to clean if necessary.
7 After sales service
Should you require after sales service please contact
the supplier from whom you purchased the
machine,who will arrange service. Repairs and
servicing of Truvox products should only be
performed by trained staff. Improper repairs can
cause considerable dangers to the user.
