14
References / Introduction
References marked on tester or in instruction manual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please pay utmost attention.
Caution! Dangerous voltage. Danger of electrical
shock.
Continuous double or reinforced insulation complies
with category II DIN EN 61140.
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(89/336/EEC), Standard EN 61326-1 are fulfilled. It also
complies with the Low Voltage Directive (73/23/EEC),
Standard EN61243-3:2010 is fulfilled.
Tester complies with the standard (2002/96/EG)
WEEE
The instruction manual contains information and refer-
ences, necessary for safe operation and maintenance
of the tester.
Prior to using the tester (commissioning/ assembly) the
user is kindly requested to thoroughly read the instruc-
tion manual and comply with it in all sections.
Failure to read the tester manual or to comply with the
warnings and references contained herein can result in
serious bodily injury or tester damage.
The respective accident prevention regulations estab-
lished by the professional associations are to be strict-
ly enforced at all times
1. Introduction / Product Package
The HDT voltage testers are voltage testers for universal
applications. The voltage testers are constructed in accord-
ance with the latest safety standards and guarantee safe and
reliable measurements and testings.
The voltage testers represent a valuable support for all testing
and measurement in handicraft and industrial applications.
The voltage tester are characterised by the following
features:
• DC and AC Voltage Tests up to 690 V Phase-Phase
• Automatic AC/DC detection
• Bright LED indication
• Ergonomical and robust housing
• Probe-tip protection
• Without batteries
• Measurement Category CAT III / 690V
• Constructed and produced in compliance with
DIN EN 61243-3, DIN VDE 0682, part 401, IEC 61010
MPM00061-FLM-000-00-final.indd 14
04.07.2014 10:38:08
