Cilo C-102, Инструкция по эксплуатации

Страница: 19 / 22

STANDBY
1
DIGITAL DVD/SAT
AUX 1 AUX 2 TUNER
RDS
TV
MEMORY
DSP
MODE
SPK
MODE
TEST
NIGHT
MONO BAND
2
STANDBY
1
DIGITAL DVD/SAT
AUX 1 AUX 2 TUNER
RDS
TV
MEMORY
DSP
MODE
SPK
MODE TEST NIGHT
MONO
BAND
2
Press the DIGITAL 1/DIGITAL 2 keys to activate the
digital inputs. Check that the Setup (digital output) of
the peripheral devices are set at RAW and bitstream
respectively.
Depending on the size of the room, the speakers may
be configured through CENTRE DELAY and
SURROUND DELAY.
Selection is also possible through the front panel by
pressing the INPUT key repeatedly.
Digital 1: Optical digital input
Digital 2: Coaxial digital input
Centre delay: The centre channel is delayed if the front speakers are placed very far apart!
Surround delay: Depending on the listening position the surround channels should be reduced or increased.
The distance from the listening position to all the individual speakers should be the same.
Press this key for dynamic compression of the DTS or Dolby Digital sound. This can be used to
reduce strong dynamic peaks. The difference between the murmur of a river and a bomb explosion is
reduced.
Night:
Selection of digital optical / coaxial inputs
Selection of analogue AUX 1 / AUX 2 inputs
TV selection
Press the AUX 1/ AUX 2 keys to activate the analogue
inputs.
Selection is also possible through the front panel by
pressing the INPUT key repeatedly.
Press the TV key to activate the analogue SCART
input/output.
Selection is also possible through the front panel by
pressing the INPUT key repeatedly.
O p e r a t i o n a n d f u n c t i o n s
19
1
DIGITAL DVD/SAT
AUX 1 AUX 2 TUNER
RDS
TV
MEMORY
DELAY
DSP
MODE
SPK
MODE
MODE
TEST
BALANCE
NIGHT
DELAY
+ +
- -
MONO BAND
CENTER REAR
2
SPEAKER