Ciena 170-3960-900 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 72

Ciena 170-3960-900 Скачать руководство пользователя страница 2

CN 3960

®

Hardware Installation Guide

M

AN-0143-001

-Revision A

Copyright Ciena

®

Corporation

March 20, 2009

LEGAL NOTICES

THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF CIENA CORPORATION
AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE OR DISCLOSE ITS
CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE. REPRODUCTION,
DISCLOSURE, OR USE IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN AUTHORIZATION OF CIENA
CORPORATION IS STRICTLY FORBIDDEN.

EVERY EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS DOCUMENT IS COMPLETE
AND ACCURATE AT THE TIME OF PRINTING; HOWEVER, THE INFORMATION CONTAINED IN THIS DOCUMENT
IS SUBJECT TO CHANGE.

Copyright 2009 Ciena Corporation

Unpublished All Rights Reserved

The material contained in this document is also protected by copyright laws of the United States of America and other
countries. It may not be reproduced or distributed in any form by any means, altered in any fashion, or stored in a data
base or retrieval system, without express written permission of the Ciena Corporation.

Security

Ciena

®

cannot be responsible for unauthorized use of equipment and will not make allowance or credit for

unauthorized use or access.

Contacting Ciena

For additional office locations and phone numbers, please visit the Ciena web site at www.ciena.com.

Corporate Headquarters

410-694-5700 or 800-921-1144

www.ciena.com

Customer Technical Support/Warranty

In North America

1-800-CIENA24 (243-6224)
410-865-4961

E-mail: CIENA24@ciena.com

In Europe, Middle East,
and Africa

800-CIENA-24-7 (800-243-6224-7)
+44-207-012-5508

E-mail: CIENA24@ciena.com

In Asia-Pacific

800-CIENA-24-7 (800-243-6224-7)
+81-3-3248-4743

E-mail: CIENA24@ciena.com

Sales and General Information

410-694-5700

E-mail: sales@ciena.com

In North America

410-694-5700 or 800-207-3714

E-mail: sales@ciena.com

In Europe

+44-207-012-5500 (UK)

E-mail: sales@ciena.com

In Asia

+81-3-3248-4680 (Japan)

E-mail: sales@ciena.com

In Latin America

011-5255-1719-0220 (Mexico City)

E-mail: sales@ciena.com

Training and Documentation

Training

877-CIENA-TD (243-6283)
or

410-865-8996

E-mail: techtng@ciena.com

Documentation

877-CIENA-TD (243-6283)
or 410-694-8125

E-mail: techpubs@ciena.com

«
1
2
3
4
...
»

Содержание 170-3960-900









































































Отзывы:

Нет отзывов