9-2
Reset Button
3930 Service Delivery Switch
Hardware Installation and Start-up Manual
009-3223-001 Standard Revision E
Copyright
©
2012-2014 Ciena
®
Corporation
January 2014
Figure 9-2
Location of the 3930 Reset Button (3930 Sync + External Timing system)
There are two different types of resets available:
•
Quick reset, which is accomplished by depressing the reset button for less
than three seconds. A quick reset reboots the system with the current
saved configuration. When you press the reset button for less than 3
seconds, all the LEDs on the faceplate will be lit.
•
Hard reset, which is accomplished by depressing the reset button for three
seconds or more continuously. When you press the reset button for more
than 3 seconds, all the LEDs on the faceplate will be lit, then they will flash
to indicate that the hard reset has been initiated. A hard reset erases the
current configuration and restores the unit to the factory default settings.
See
39XX/51XX Product Fundamentals
for more information about the
factory default settings.
Note 1:
The 3930 Sync + External Timing systems have additional
behavior that occurs when the reset button is pushed and the system is
unresponsive. If you are using a 3930 Sync + External Timing unit you
should also read the section
“Creating a State Dump or Core Dump Log
Note 2:
Pressing the reset button will also result in an LED indication. The
Reset Button
Содержание 170-3930-900
Страница 103: ......
