2
INTRODUCTION
Thank you for buying our suspended ceiling speaker. Please read and have a thorough understanding of the entire manual before
installation and use. Keep the manual for maintenance.
IMPORTANT:
CIE-Group Ltd has made every effort to provide accurate and detailed instruction for this product’s assembly and in-
stallation. Should you have any doubts consult a qualified professional installer. CIE-Group Ltd recognizes no liability for any difficulty
or problem derived from the interpretation of these instructions. These speakers and all their parts and accessories must only be used
for the purpose they have been constructed.
CIE-Group Ltd, its commercial distributors and retailers are not, directly or indirectly, responsible for any damage to persons and or
properties derived from the use of this product in an unsafe or different way for which it has been designed and constructed.
Several parts of this product are small pieces of hardware therefore extreme care should be taken to keep them from children.
Read these instructions carefully before using the product
1.
Please ensure that the chosen structure is checked and is suitable to suspend this product. This product must be
firmly attached and it is recommended to fix an additional safety wire. The installer will be fully responsible for the
safe installation of this product.
2.
Do not install the speakers in fine wood or soft wall material because the screws might come loose, which may result
in product falling and causing personal injury.
3.
Do not use nails, adhesives or other unauthorized fixing devices. Long-term use and vibrations may cause it to fall easily.
4.
Do not place the speakers on a turntable or movable support.
5.
Do not touch or bump the woofer and tweeter. If these are damaged, the sound will be distorted.
6.
Do not listen to sound at a very high level when you are changing the input source (for example, to tune FM/CD)
Installation or removal of cables should make sure that the power amp/amplifier device is turned off.
7.
Do not attempt to clean the speakers with chemical solvents as this may damage the paint surface. Clean with
a dry cloth.
Connection
Use wire on the back of the speaker in the output tab of the amplifier. In order to ensure correct polarity please check that the RED
connection is connected to the positive feed from the amplifier and the BLACK connection is connected to the negative (control) feed
from the amplifier. If the polarity is reversed, the sound will be unnatural and bass will not be present.
UNDERPOWERING VS OVERPOWERING