CiDRA AIRtrac, Руководство по установке, эксплуатации и поддержке

Страница: 28 / 52

21798-01-EN Rev 02 Page 26
Battery Charger
The battery charger (Figure 18) should be mounted inside the truck
cab where it is out of the way but accessible by the driver. The
charger is supplied with a 12VDC plug for connecting to the truck
power outlet.
The AIRtrac Mobile System is supplied with two batteries. While one is
being used in the sensor the other should be stored in the battery
charger so it is always charged and ready for use.
Figure 18: Battery Charger
Telematics Module Installation
Determine a location for the telematics module inside the truck cab.
The mounting location must allow the 1 ft (0.3 m) telematics cable to
be spliced to the free end of both the receiver and display cables.
Prior to mounting the receiver module, display and telematics module,
verify the free end all cables can reach a common location. Also, use
the form in APPENDIX B - Installation Record to record the telematics
module serial number located on the back of the module (Figure 19)
and truck identification number for each installed AIRtrac Mobile
system.
Use self-tapping screws or equivalent to hold the telematics module
securely in place (screws not provided).