Cidco Communications CL906, Руководство пользователя

Страница: 19 / 28

CL906 - 900MHz Cordless
USING THE CL906 15
USING THE CL906
A
NSWERING
C
ALLS
You can answer a call two ways:
a. Press TALK or any key on the handset.
b. Press FLASH to answer Call Waiting calls.
D
IALING
C
ALLS
a. Press TALK .
b. Use the number pad to dial the phone number.
Listen for a connection.
c. To end the call, press TALK or replace the
handset on to the base.
P
RE
-D
IALING
When no digits are showing on the display, you can pre-dial
from the handset.
a. Use the keypad on the handset to enter a
phone number or special characters such as
a 3-second pause,
#
, and
*
.
b. Check the number on the display. If the
number is wrong, press DELETE to
backspace.
c. Press TALK to dial the telephone number.
d. The channel number and then the call timer, is
displayed on the screen.
e. To end the call, press TALK or replace the
handset on the base.
R
EDIAL
Press REDIAL . The phone will automatically dial out the last
number called with one touch.
P
AGING AND
F
INDING THE
H
ANDSET
Should you misplace the handset, you can locate it by
pressing
PAGE
on the base. The handset beeps for 20
seconds, or until you either press a key on the handset or
press the
PAGE
key again. If the handset does not beep, the
handset battery may need to be recharged.
U
SING
F
LASH
Press the FLASH key to switch between calls if you
subscribe to Call Waiting . The first call is placed on hold
while you are on the second call.
U
SING
T
EMPORARY
T
ONE
S
ERVICE
If you do not have Tone service in your local area, but need
to set your telephone to Tone for interacting with bank and
other automated services, you can temporarily override your
CL906.book Page 15 Friday, January 18, 2002 2:25 PM