CICLOSPORT CicloPuls CP 11 L, Руководство пользователя

Страница: 23 / 90

22
PULSE MODE DISPLAY
CURRENT HEART RATE
Press button A to return to the PULSE mode
display. The current heart rate is displayed
on Middle line of the LCD. The heart-symbol
on the left hand side will start to flash if a
signal is received from the transmission belt.
The symbol will freeze and the last heart
rate record will be displayed if no signal is
received.
For power saving, the watch will automatically return to clock mode if
no signal is received for about 2 minutes.
% OF MHR (Maximum Heart Rate)
This is the data showing the percentage of
Current Heart Rate comparing to Maximum
Heart Rate (MHR by age). It is useful to
monitor your heart performance safely and
effectively during exercise
HEART RATE ALARM SETTING
In “PULSE” mode, press button
B
to enter into submode “TIME”
- Hold button
c
until “AGE” appear to enter into PULSE mode setting.
- Press button
B
to increment age by 1
- Press button
c
to confirm and go into ZONE setting for High zone
- The upper limit for the heart rate “ZONE HI” flashes on the display.
Press button to go to the desired value. Press button
c
to confirm
- The lower limit for the heart rate “ZONE LO” flashes on the display.
Press button to go to the desired value. Press button
c
to confirm
- The alarm symbol of the heart rate alarm flashes on the display.
Press button
B
to choose one
alarm will be activated only when your heart rate exceeds the
upper limit.
alarm will be activated only when your heart rate drops below the
lower limit.
alarm will be activated both when your heart rate exceeds the
upper or drops below the lower limit.
- After setting press button
a
to confirm setting and exit setting mode
alarm sound on/off
- Press Button
c
to select alarm sound on or off.
exercise Zone
alarm activation
symbol
function state
current
Heart Rate
% of
Max. Heart Rate