CICLOSPORT Ciclo navic 50, Инструкция по эксплуатации

Страница: 4 / 25

4
For using it on the stem rotate the upper part of
the bracket. Open the 4 screws, rotate it
90° to the left and assemble it again with the 4 sc rews
(pict. B).
Remove the protective tape from the underside of the handlebar bracket,
place the handlebar bracket in the required position on the handlebar (or on the stem) and
press it down slightly. Secure it with the cable ties
2.3 Attaching to the handlebar bracket
To insert the CicloNAVIC 50 into the handlebar bracket, rotate it 45° to the le ft, insert it and
then turn it to the right until it engages
.
To unlock, rotate the CicloNAVIC 50 45° to the left and remove it.
2.4 Attaching to the wristband (optional)
To use the CicloNAVIC 50 also e.g. during hiking an additionally wristband is available (at
your dealer).
The wristband can be fixed on the wrist, but also on the upper arm. To insert the
CicloNAVIC 50 into the wristband operate as described in chap. 2.3.
2.5 Using the protective cover
This package also contents a silicon protective cover for the CicloNAVIC 50. This is useful to
protect the CicloNAVIC 50 e.g. of heavy rain during a ride.
Insert the CicloNAVIC 50 into the cover, so that the big opening is on the display and the
small opening is on the back.
After use during wet weather the protective cover should be taken off for better drying.