Thank you for choosing the HAC 1.1 /
HAC 1.1 SPD. Here‘s how you set up
your bike computer before your first
ride.
1. Install the handlebar bracket on the handlebar.
2. Install the transmitter on the fork and screw the
magnet on one spoke (included at SPD version
only). Please note that the distance between
transmitter and magnet should not be more than
3 mm.
3. Open the battery door on the back of the device
with a coin and insert the battery, then close the
battery door.
4. To connect the sensors, please follow the path
as described:
Main menu
Short menu
Sensors
All or
single sensor
Now the device searches for
a sensor (please note that the sensor must be
active!)
5. To adjust the wheel circumference, please follow
the path as described:
Menu
Settings
Profiles
Select Profile
Wheel size
Enter your wheel circumference
6. To get started, please switch to the function-views:
Main menu
Start
Extra: To change the languages and units please
follow the path as described:
Main menu
Set
General
Languages
Units
KA_HAC_1.1_65x115_190419.indd 7
23.04.19 17:05
