CIC Frilled Lizard, Руководство по сборке и инструкция, Страница: 2 / 38

(1:1) (1:1) (1:1)
Product Introduction
Mechanical Parts List
Gear With Shaft
Pinion Gear(White)
Tapping Screw
Gear(Red)
Gear(Purple)
Hex Shaft(Middle) Hex Shaft(Long) Hex Shaft(Short)
Gear(White) Gear(Yellow)
QTY
1
5 1 1
1 1 1
QTY
1
QTY
1
QTY
QTY QTY QTY
QTY QTY QTY
2
P4 P3 P2 P1
P5 P6 P7
P8 P9 P10
Frilled Lizard Robot has an infrared sensor that is programmed to “escape” or “follow-me”.
If the infrared sensor is activated in the “escape” mode the robot will automatically act
“shocked!”, spreading its frill, dropping its jaw, illuminates its bicolor LED eyes and will
scurry away from you until it escapes to a safe distance. If the infrared sensor is switched
to the “follow-me” mode using the 2 way function switch, then the robot will assess danger
by bluffing the attacker (unfurling and shaking its frill). When the robot does not sense
danger it will proceed to follow you like a pet lizard.
Thank goodness, that unlike the wacky frilled lizard that roams in Australia’s tropical
woodland, this Frilled Lizard Robot is whimsically kooky and fun to build.
Product contains functional edges and sharp points.
Frilled Lizard Robot KIT
1
Alkaline batteries are
recommended
Tools You May Need
Diagonal Cutter
Knife Battery(AAA) x 4 Screwdriver Hammer