EN-5
EREBA T-HT / He
3 - OVERVIEW OF ICONS
Days of week:
Temperature display:
Monday – Sunday
Room temperature
Clock:
Water temperature
12-hour or 24-hour clock display
Room temperature:
Occupancy lock:
System control is based on room
temperature
Occupancy is set manually by the user
(schedule control is disabled)
Water temperature:
Occupancy:
System control is based on water
temperature
HOME mode is active
Advanced settings:
Occupancy:
The icon is blinking when a password
is required
SLEEP mode is active
Heating mode:
Occupancy:
HEATING mode is active
AWAY mode is active
Cooling mode:
Setpoint:
COOLING mode is active
Temperature to be achieved
(room or water temperature)
Pump status:
Electric heater stage active:
Pump is running
Used in the case of heat pump failure
or low outdoor air temperature
Domestic Hot Water mode (DHW):
Boiler active:
DHW mode is active
Used in the case of heat pump failure
or low outdoor air temperature
Master / Slave:
Alarm:
Steady icon: This interface is
connected to the master unit and it is
used to control all units in the same
master/slave group
Steady icon: Alarm condition
detected; the unit is stopped
Fast flashing icon: This interface is
connected to the slave unit and it is
controlled by commands sent from the
Master
Flashing icon: Alarm condition
detected; the unit is running
Slowly flashing icon: Master/Slave
communication failure
NOTE
When the user interface backlight is switched off, press any key to turn on the display.
