©
CIAS Elettronica S.r.l.
Ed.
1.1
Installation Manual
Page
15
of
23
Micro-Ray-Card8
Note:
In all the modes listed above, to use dip-switches 3... 8, necessary to set the
number of barrier to be monitored, refer to tables n.10, n.11 and to set the number
of rays of the barrier refer to table n.12
3 CONNECTIONS MODE
3.1 Serial RS485
This configuration uses the RS-485 serial line to transmit information from one or more
Micro-Ray barriers (maximum 6 for each group) to Micro-Ray-Card8 devices.
The possible applications have been described in the previous paragraphs.
3.2 Ethernet connection
This configuration allows you to use the Ethernet network to transmit information from one
or more Micro-Ray barriers (maximum 6 per group) to micro-ray-card8 (Master or Slave)
devices connected to the same network.
To achieve this feature, you must have:
- an IP-DOORWAY-C (or -S, in case of PoE power), to connect each column to the
Ethernet network
LINE RS-485
CARD8 MASTER
(MULTIPLE mode)
CARD8 SLAVE
(SINGLE mode)
Barrier 1
CARD8 SLAVE
(SINGLE mode)
Barrier 2
CARD8 SLAVE
(SINGLE mode)
Barrier 3
CARD8 SLAVE
(SINGLE mode)
Barrier 4
CARD8 SLAVE
(SINGLE mode)
Barrier 5
CARD8 SLAVE
(SINGLE mode)
Barrier 6
MICRO-RAY 1
MICRO-RAY 6
…..
MICRO-RAY 2
MICRO-RAY 1
MICRO-RAY 2
…..
IP-DOORWAY
IP-DOORWAY IP-DOORWAY
IP-DOORWAY