5. INSTALLATION
5.1. MACHINE HANDLING
The ice cream display cabinet handling, from the truck to the final place, has to be made
by any truck-lift, which is proper to its weight. The display cabinet shall be always
balanced in order to ensure personnel integrity and machine functionality
The cabinet can be shipped with or without wood packaging, in case wood crate will be
used, will have a pallet base for an easy fork-lift handling. The pallet, however should be
handle in the central position
During the shipment, it is necessary to avoid any crash or/and shake of the display
cabinet in order to not damage its frame, especially its glasses.
Do not drag the display cabinet on the floor and do not push it on the upper glasses.
5.2 STOCK OF THE DISPLAY CABINET
Whenever the cabinet has to be stoked, follow carefully what suggested before.
Environmental temperature during the cabinet stock can have following range -15°C and + 55°C and humidity between 30% and 90%.
The display cabinet has always to be protected by sunrays and raining.
In case the display cabinet has to remain in stock quite long time before its use, keep it with its packaging in order to maintain its protection.
5.3. PACKAGING REMOVE
Before getting the display cabinet from the forwarding agent, check its conditions. In case it will be some damages, inform the driver and sign it on
shipping documents.
Eventual damages relevant to the shipment and/or to the wrong stock, have not to be ascribed to the manufacturer.
5.4. DISPLAY CABINET POSITION
The refrigerated display cabinet needs particular environmental conditions in order to offer the right performance, so that the area where it will be
used has to respect following indications
Floor has to be levelled perfectly, on the contrary keep the display cabinet on the horizontal
position in order to guarantee a perfect defrosting water drain and avoid boring compressor
noises.
The display cabinet has to not be under the sun-rays in order to have its better refrigeration
performance, has to remain inside the local or to be sheltered by window curtain. If what
described above is not observed, it can determinate an increase of temperature of displayed
product and an increasing power consume.
The display cabinet has not to be under air currents due to open doors or windows, or under
roof ventilators or under air condition outlets.
In case will be not respected the above suggestions it can arise an increasing of temperature
of the displayed product and/or an increasing ice phenomena on the evaporator and internal
fans, which compromise the correct cold air circulation and product consistence
The display cabinet has not to be placed close any heat source as heaters, ovens, etc
The display cabinet has to have a sufficient place in order to ensure a correct custom service,
to make an easy maintenance operation, to guarantee the right air flow necessary to make
cold the condenser. Besides the warm air which flows out has to no have any obstacle or to
invest other equipments in order to not reduce the correct functions.
Содержание CIAO GEL 12
Страница 11: ......
