CIAAT BRAVA21, Руководство по эксплуатации

Страница: 13 / 25

Chapter 2. Installing and Set Up
9
Loading Paper
1. In the drawer unit pull out, pull the
lever to open the open guide unit.
Pull out the drawer unit and pull the
lever to open the open guide unit.
3. Set the paper in the printer.
Set the paper by matching the color of the
paper flange and the color of the holder.
After setting the paper, remove the seal
from the paper.
Turn on the power of the printer by
pressing "|" on the power switch.
2. Install the paper flange (white) and paper
flange (blue) in the paper. 4× 6 size,
6× 8size as shown.
5. Close the open guide unit.
When close the open guide unit, press on the
center of the open guide unit.
Caution: Close the front cover
carefully so as not to catch your
fingers.
Close the drawer unit and later to
close the open guide unit.
Attention: Do not open the drawer unit
quickly or with unnecessary force.
Do not press the drawer unit or place a
heavy object other than paper after opening
the drawer unit.
Install spacers in the paper flanges first when
using L size paper or 5×7 size paper. When
using 4×6 size paper or 6
 8 size paper, proceed
with Step 3 without installing the spacers.
Caution: The paper is not set correctly if
there is a gap of about 10mm between the
paper flange and paper. Match the notch
of the paper flange and the notch of the
paper core by rotating the paper flange.
4. Insert the edge of paper under the guide
roller by rotating the paper flanges.
Insert the paper until the Paper Setting
Lamp is lit.
6. Close the drawer unit.
When the drawer unit is closed,
initialization starts and four sheets of paper
are ejected automatically.
Blue White
Notch
PAPERSET lamp Guide Roller
Blue
White
White Spacer (white) Spacer (Blue) Blue
Notch Notch Notch Notch
Notch