CiA TVV420S, Инструкция по установке и эксплуатации

Страница: 16 / 40

- 16 -
4. Record Setup
To set the record condition, press the MENU button to display the Menu.
- Use the direction button [ (Up), (Down)] to select the Record Setup.
- Press the ENTER button to display the Record Setup menu on the monitor.
Figure 2-4. Record Setup
1. To set the recording speed, use the direction button [ (Up), (Down)] to select
the Rec Speed.
- To change the recording speed, use the direction button [ (Left), (Right)].
Recording Speed : User can select the recording speed(unit : frame/sec).
NTSC : 30, 28, 26, 22, 18, 16, 14, 12, 10, 8, 6, 4, 2, 1, 1f/2sec, 1frame/4sec
PAL : 25, 23, 21, 19, 17, 15, 13, 11, 9, 7, 5, 3, 1, 1f/2sec, 1frame/4sec
[In case of Alarm & Motion record, it will be recorded 30fps for duration time.]
2. To set the recording video quality, use the direction button [ (Up), (Down)] to
select the Video Qual.
- To change the recording video quality, use the direction button [ (Left), (Right)].
Recording Video Quality : These are 3 levels in Recording Video Quality.
[Super/High/Low]
User can change it by pressing ‘Right’ button.
3. To set the recording video resolution, use the direction button [ (Up), (Down)] to
select the Video Res..
- To change the recording video resolution, use the direction button [ (Left), (Right)].
Recording Video Resolution : These are 2 levels of Recording Video Resolution.
Full : 720*480(NTSC), 720*576(PAL)
Half : 360*480(NTSC), 360*576(PAL)
4. To set the buzzer on or off, use the direction button [ (Up), (Down)] to select
the Buzzer.
- To change the buzzer on or off, use the direction button [ (Left), (Right)].
Record Buzzer : If you select ‘ON’, DVR System makes buzzer sound
when it record video.
5. To set the pre recording, use the direction button [ (Up), (Down)] to select the
Pre Rec.
- To change the pre recording on or off, use the direction button [ (Left), (Right)].
Pre Rec (Pre Record) : This DVR system will record pictures which are captured prior to
event picture like detection of Alarm and Motion. And Pre record is real time
recording even though the record setup is not real time
(NTSC:30frame/sec, PAL:25frame/sec).
Pre recording time : OFF, 5s, 10s, 15s, 20s, 25s, 30s
If Pre Rec set time, even though user press the Search button, search list doesn’t
display on the monitor. When the Pre Rec is working, the DVR System is checking HDD
continuously.
6. Press the MENU button to exit the programming mode.