１
I. Points for Attention
1.
Before installing the omni bearing intelligent unit, please read the operation
manual carefully.
2.
The camera takes power supply of DC12V/1.2A. You should assure that the power
supply of the product has an input voltage with load about 12V rather than a
unload voltage of 12V, otherwise the camera couldn’t work normally.
3.
During the process of transportation, storage and installation, the dome should be
avoided of incorrect operations such as heavy pressing, strong vibration etc. which
can cause damage of product as there are sophisticated optical and electronic
devices inside the machine.
4.
Do not attempt to disassemble the camera. In order to prevent electric shock, do
not remove screws or covers. There are no user serviceable parts inside and only
qualified personnel are to service the unit
5. Always follow all electrical standards for safety when it is in operation. Adopt the
particular power supply, which is provided with the dome. RS-485 and video
signal should keep enough distance with high voltage equipments and cables
when they are in transmission. Precautions for anti-lightning and anti-surging
should be taken if necessary.
6. The product should be indoor installed and operated to avoid rain and moisture. Do not use it
in wet places. If outdoor installation is needed, the closed protect cover should be used and it
is absolutely prohibited to use it in open air independently.
7. Do not operate it in case temperature, humidity and power supply are beyond the
limited stipulations.
8
．
Do not let the video camera aim at the sun or the object with extreme light
whatsoever it is switched on or not. Do not let the video camera aim at or monitor
bright and standstill object for a long time.
9. Do not use aggressive detergent to clean the main body of the video camera.
Wipe dirt with dry cloth. If needed, mild detergent can be used suitably.
10. Operate the intelligent high-speed spherical video camera with great care to
avoid shock or vibration. It operate incorrectly, machine could be damaged.
11.
Install the video camera in the place where endurance should be enough large.
12.
Should be dust on the lens, you should wipe it with special lens tissue.
