Plug in the purifier 30 minutes after installation.
After installation, check whether water comes out
properly by pressing the faucet lever after turning
the selection switch to the cold water position(blue
light, 30 minutes after turning on the purifier).
Do not move the purifier while in
operation.
Avoid severe percussion to the purifier.
Change filters on time to always have
clean drinking water.
In case water is not coming out for a long period of
time, it may be due to an interruption of the input
water or the purifier is not functioning properly.
Check if raw water is supplied or the purifier
produces water properly.
Clean inside the storage tank with a tender cloth
more than once in two weeks.
In the case of not using the purifier for a long period
- Unplug the purifier and close the tap water valve.
- Drain out remaining water in the cold and purified
water tanks.
(Still water in the tanks might be the cause of
decomposition if left for a long period of time.)
-When using again, follow the same steps as in
installation.
Do not use chemicals (the inflammables, organic
solvents, etc.) for cleaning the system.
The ratio of the purified and rejection water is one to
two.
Amount of time needed for the purifier to reach set
temperature while in operation might differ greatly
depending on the environment (temperature,
humidity and raw water).
We do not warrant problems that are a result of un-
authorized service.
The purifier is best suit to the following conditions:
-Water pressure:7~120psi (0.5kgf/cm ~8.4kgf/cm )
-Water temperature:4 ~38
-pH:5~10
-TDS:below 500ppm
-Water quality: Biologically secure water
Please consult your local distributor service centers
when the above conditions do not fit in with you.
If you do not comply with the conditions described
above without consultation, you will be excluded
from a free warranty period.
1. Sediment filter : every 6 months
2. Pre-carbon filter: every 12 months
3. Post-carbon filter : every 18 months
4. Membrane filter : every 24 months
5. UV filter : every 8 months (change lamps after checking)
These are not warranty periods but an ideal time to change filters.
Changing filters on time allows you to have fresh, clean drinking water.
Filter life cycles described above are just an estimate and could be
shortened depending on water quality, water pressure, temperature and season (summer, winter)
Water purification does not
function properly.
Power plug of the product may not be
connected properly.
Connect the power plug properly.
water supply may be suspended.
s the cold water displayer on?
Wait until raw water is supplied.
Connect the power plug to the electric outlet.
Symptoms
Confirmation
Measures
Water cooler does not function
properly.
