3) Draw the Cable A around the Pulley (58) then pull it down towards to the opening on the Double
Floating Pulley Bracket (17).
Attach one Pulley (58) to the Double Floating Pulley Bracket (18) with one M10x45 Hexagon Head Bolt
(31), M10 Nylon Nut (42), and
φ
10 Washers (38-2pcs).
4) Draw the Cable A around the Pulley (58) on the Double Floating Pulley Bracket (17) then pull it up
towards to the opening on the Upper Frame (6).
Attach two Pulleys (58) to the Upper Frame (6) with M10x45 Hexagon Head Bolt (31-2pcs), M10 Nylon
Nut (42-2pcs), and
φ
10 Washers (38-4pcs).
5) Draw the Cable A around these two Pulleys (58) on the Upper Frame (6) then pull the Cable A
downwards to the Weight Pick Up Pole (11).
6)Thread the bolt at the end of the Cable into the opening on top of the Weight Pick Up Pole (11) to
secure the Cable.
INSTALL THE CABLE B
Attach one end of the Cable C to the hook on the Right Butterfly Arm (9R).
7-8) Draw the Cable B to the right Swivel Pulley Bracket (16).
Attach a Pulley (58) to the right Swivel Pulley Bracket (18) with M10x45 Hexagon Head Bolt (31), M10
Nylon Nut (42), and two
φ
10 Washers (38).
9) Draw the Cable B downwards to the Crossed Double Floating Pulley Bracket (18).
Attach the Pulley (58) to the Crossed Double Floating Pulley Bracket (18) with M10x45 Hexagon Head
Bolt (31), M10 Nylon Nut (42), and
φ
10 Washers (38-2pcs).
10) Draw the Cable B to the left Swivel Pulley Bracket (16).Attach a Pulley (58) to the left Swivel Pulley
Bracket (16) with M10x45 Hexagon Head Bolt (31), M10 Nylon Nut (42), and
φ
10 Washers (38-2pcs).
11) Attach the other end of the Cable C to the hook on the Left Butterfly Arm (8L).
INSTALL THE CABLE C
12) Attach the CableC to the open bracket on the bottom of the Leg Developer (5). Note: The Ball
Stopper on the cable should be underneath the Pulley (58).
Attach the Pulley (58) to the Leg Developer (5) with M10x45 Hexagon Head Bolt (31), M10 Nylon Nut
(42), and
φ
10 Washers (38-2pcs).
13) Draw the Cable c around the main support tube (3)then attach the Pulley (58) with one
M10x65Hexagon Head Bolt (30), M10 Nylon Nut (42), and
φ
10 Washers (38-2pcs).
14) Draw the Cable c to open bracket on the Base Tube (1).
Attach the Pulley (58) to the Base Tube (1) with M10x45 Hexagon Head Bolt (31), M10 Nylon Nut (42),
and
φ
10 Washers (38-2pcs).
15) Pull the Cable c up to the open bracket on the Crossed Double Floating Pulley Bracket (18).Attach
the Pulley (58) to the Crossed Double Floating Pulley Bracket (18) with M10x45 Hexagon Head Bolt
(31), M10 Nylon Nut (42), and
φ
10 Washers (38-2pcs).
16) Draw the Cable c to the Double Floating Pulley Bracket (17).
Attach one Pulley (58) to the Double Floating Pulley Bracket (17) with M10x45 Hexagon Head Bolt
(46), M10 Nylon Nut (42), and
φ
10 Washers (38-2pcs).
Draw the Cable c around the Pulley (58) on the Base Tube (1) and then pull it up towards to the open
bracket on the Double Floating Pulley Bracket (16).and pull it downwards to the triangle plate on Main
support Tube (3)
14
Содержание 2008c
Страница 4: ...OVERVIEW DRAWING 3...
