Chrysler Patriot, Руководство пользователя

Страница: 201 / 251

Fluid And Filter Changes
Refer to “Maintenance Schedule” for the proper
maintenance intervals.
Special Additives
Do not add any materials (other than leak
detection dyes) to Continuously Variable Trans-
axle (CVT) Fluid (CVTF+4
姞
). CVTF+4
姞
is an
engineered product and its performance may
be impaired by supplemental additives.
CAUTION!
Do not use chemical flushes in your transmis-
sion as the chemicals can damage your trans-
mission components. Such damage is not
covered by the New Vehicle Limited Warranty.
Manual Transaxle – If Equipped
Lubricant Selection
Use only the manufacturers recommended
transmission fluid. Refer to “Fluids, Lubricants,
and Genuine Parts” in “Maintaining Your Ve-
hicle” for further information.
Fluid Level Check
Check the fluid level by removing the fill plug.
The fluid level should be between the bottom of
the fill hole and a point not more than 3/16 in
(4.7 mm) below the bottom of the hole.
Add fluid, if necessary, to maintain the proper
level.
Frequency Of Fluid Change
Under normal operating conditions, the fluid
installed at the factory will give satisfactory
lubrication for the life of the vehicle. Fluid
changes are not necessary unless lubricant
has become contaminated with water.
NOTE:
If contaminated with water, the fluid should
be changed immediately.
Rear Drive Assembly (RDA) –
AWD/4WD Models Only
Lubricant Selection
Use only the manufacturer’s recommended
fluid. Refer to “Fluids, Lubricants, and Genuine
Parts” in “Maintaining Your Vehicle” for further
information.
Fluid Level Check
Visually inspect the unit at each oil change for
leakage. If leakage is detected, check the fluid
level by removing the fill plug. The fluid level
should be maintained between the bottom of
the fill hole to 1/8 in (4 mm) below the fill hole.
Add fluid, if necessary, to maintain the proper
level.
Frequency Of Fluid Change
Refer to “Maintenance Schedule” for the proper
maintenance intervals.
Power Transfer Unit (PTU) –
AWD/4WD Models Only
Lubricant Selection
Use only the manufacturer’s recommended
fluid. Refer to “Fluids, Lubricants, and Genuine
Parts” in “Maintaining Your Vehicle” for further
information.
Fluid Level Check
Visually inspected the unit at each oil change
for leakage. If leakage is detected, Check the
fluid level by removing the fill plug. The fluid
level should be maintained between the bottom
of the fill hole to 1/8 in (4 mm) below the fill hole.
199
PAGE POSITION: 201 JOB: @ibm2/chry_pdm/CLS_chrysler-intl/GRP_owners/JOB_202720-en-pat-10MK74-126-ENG-AA/DIV_og pubnum: