Chrysler Pacifica 2022 Скачать руководство пользователя страница 97

Страница: 97 / 384

GETTING TO KNOW YOUR VEHICLE

NOTE:



During Express Open or Express Close opera

tion, any other actuation of the switch will stop

the sunroof.



If the sunshade is in the closed position when

the open switch is pushed, the sunshade will

automatically cycle to the halfway open position

prior to the sunroof opening.

Manual Open/Close
Push and hold the open switch and the sunroof will

open to the full open position.
To close the sunroof, push and hold the close

switch.
Any release of the switch during open or close

operation will stop the movement and the sunroof

will remain in a partially open condition until the

sunroof switch is pushed again.

PENING

LOSING

OWER

UNSHADE

— I

QUIPPED

The sunshade has two programmed open

positions: half-open and full-open. When opening

the sunshade from the closed position, the

sunshade will always stop at the half-open position

regardless of express or manual open operation.

The switch must be actuated again to continue to

the full-open position.

Express Open/Close
Push the sunshade open switch and release it

within one second and the sunshade will open to

the half-open position and stop automatically.

Push and release the sunshade open switch again

from the half-open position and the sunshade will

open to the full-open position and stop

automatically. This is called Express Open.
Push the sunshade close switch and release it

within one second and the sunshade will close

automatically from any position. If the sunroof is

completely closed, the shade will close fully and

stop automatically. This is called Express Close.
NOTE:



During Express Open or Express Close opera

tion, any movement of the sunshade switch will

stop the shade.



If the sunroof is open, the shade will close to the

half-open position. Pushing the shade close

button again will automatically close both the

sunroof and shade completely.

Manual Open/Close
Push and hold the sunshade open switch and the

shade will open to the half-open position and stop

automatically. Push and hold the sunshade open

switch again and the shade will open automatically

to the full-open position.

To close the shade, push and hold the sunshade

close switch.
Any release of the switch will stop the movement

and the sunshade will remain in a partially opened

condition until the switch is pushed again.

INCH

ROTECT

EATURE

This feature will detect an obstruction in the

closing of the sunroof during the Express Close

operation. If an obstruction in the path of the

sunroof is detected, the sunroof will automatically

retract. Remove the obstruction if this occurs.
NOTE:

If three consecutive sunroof close attempts result in

Pinch Protect reversals, Pinch Protect will disable

and the sunroof must be closed in Manual Mode.

ENTING

UNROOF

Push and release the Vent button within one

second and the sunroof will open to the vent

position. This is called Express Vent, and it will

occur regardless of sunroof position.
NOTE:

If the sunshade is in the closed position when the

vent switch is pushed, the sunshade will automati

cally cycle to the halfway open position prior to the

sunroof opening to the Vent position.

22_RUP_OM_EN_USC_t.book Page 95

Содержание Pacifica 2022

































































































































































































































































































































































































Результаты поиска

Содержание Pacifica 2022

Отзывы:

Chrysler Pacifica 2022, Руководство пользователя, Страница: 97 / 384

Результаты поиска

Содержание Pacifica 2022

Отзывы: