Chrysler Cruiser PT 2010 Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 398

Chrysler Cruiser PT 2010 Скачать руководство пользователя страница 128

When returning the seatback to its upright position,
make sure that the seat latches are engaged. You should
not be able to fold the seatback forward and/or tumble
the seat unless the release button is pressed, the emer-
gency release handle is pulled and/or the tumbling seat
release strap is pulled. Do not allow passengers to ride in
a rear seat if one or more of the seat latches is not
engaged.

WARNING!

Do not ride in any of the rear seating positions when
one or more of the seat latches is not engaged. Riding
with the seat latches disengaged could result in
serious or fatal injury.

NOTE:

The tumbling seat tether should be clipped onto

the elastic strap provided on the base of the seat cushion
before returning the seat to its normal position.

Rear Seat Removal

The rear seats can be removed to provide more cargo
space.

1. Push and hold the button on the seatback and fold
down the rear seatback.

Folding Rear Seat Button

128

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
126
127
128
129
130
...
»

Содержание Cruiser PT 2010















































































































































































































































































































































































































Отзывы:

Нет отзывов