Chrysler Crossfire 2007 Скачать руководство пользователя страница 80

Страница: 80 / 299

NOTE:

When moving the seat, be sure that there are no

items in the footwell or behind the seats. Otherwise you
could damage the seats.

Manual Seat Adjustments (If Equipped)

Seat Height (Drivers Seat Only)

•

Pull up on handle 3.

•

To lower the seat, use your body weight to push the
seat downward.

•

To raise the seat, lift your body weight off the seat to
obtain a higher seat position.

•

Release handle 3 when you are at your desired seat
level.

Forward/Rearward

•

Pull up on handle 4.

•

Move the seat forward or backward to your desired
position which allows you to reach the pedals com-
fortably.

•

Let go of handle 4. The seat should make an audible
click when positioned properly.

•

Check for proper engagement before driving.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание Crossfire 2007












































































































































































































































































































Результаты поиска

Содержание Crossfire 2007

Отзывы:

Chrysler Crossfire 2007, Руководство пользователя, Страница: 80 / 299

Результаты поиска

Содержание Crossfire 2007

Отзывы: