Chrysler 2010 PT Cruiser Скачать руководство пользователя страница 233 | Manualshive

Страница: 233 / 400

Chrysler 2010 PT Cruiser Скачать руководство пользователя страница 233

•

If the system detects powertrain overheating, the
transaxle will revert to the automatic shift mode and
remain in that mode until the powertrain cools off.

•

If the system detects a problem, it will disable the
AutoStick

威

mode and the transaxle will return to the

automatic mode until the problem is corrected.

DRIVING ON SLIPPERY SURFACES

Acceleration

Rapid acceleration on snow covered, wet, or other slip-
pery surfaces may cause the front wheels to pull errati-
cally to the right or left. This phenomenon occurs when
there is a difference in the surface traction under the front
(driving) wheels.

WARNING!

Rapid acceleration on slippery surfaces is dangerous.
Unequal traction can cause sudden pulling of the
front wheels. You could lose control of the vehicle
and possibly have an accident. Accelerate slowly and
carefully whenever there is likely to be poor traction
(ice, snow, wet, mud, loose sand, etc.).

Traction

When driving on wet or slushy roads, it is possible for a
wedge of water to build up between the tire and road
surface. This is hydroplaning and may cause partial or
complete loss of vehicle control and stopping ability. To
reduce this possibility, the following precautions should
be observed:

1. Slow down during rainstorms or when roads are
slushy.

232

STARTING AND OPERATING

«
...
231
232
233
234
235
...
»

Содержание 2010 PT Cruiser

















































































































































































































































































































































































































Отзывы:

Нет отзывов